Installation Of Antenna; Loading Battery - Carson 1st Go-Kart RTR electric Instruction Manual

b. Installation of Antenna
• Thread the antenna cord through the antenna pipe and
• Then push the aerial tube into the aerial holder (see picture).
c. Loading Battery
Beware:
Only use the specially provided charger units to charge the
nickel metal hydride batteries.
Otherwise your drive battery could be damaged. We
recommend the CARSON plug-in charger "Turbo 6",
N o 50 060 6030.
The charging time will vary according to the charger unit and
battery type.
Advice
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy
before being charged.
• Rechargeable batteries are only to be charged under adult
supervision.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• Regular examination of transformer or battery charger for
any damage to their cord, plug, enclosure and other parts.
CARSON 1st Go-Kart electric RTR 50 040 4013
GB
7