Connecting Your A/V Receiver, Vcr And Stereo Tv - Motorola HDT101 User Manual

Connecting your A/V Receiver, VCR and Stereo TV

1
Connect a coaxial cable to the
and the input connector on the A/V receiver.
SPDIF
When using the Digital Audio output (
baseband audio connections to the A/V receiver are not needed.
2
Connect a video cable to the
the / connector on the A/V receiver.
CABLE TV VIDEO
If your equipment supports it, S-Video connections may be used in
place of the standard composite video connections. In most cases,
S-Video offers a higher level of standard definition video quality than
composite video.
3
Connect a stereo audio cable to the
connectors on the A/V receiver and the
connectors on the stereo VCR.
4
Connect a stereo audio cable to the
connectors on the stereo VCR and the
connectors on the A/V receiver.
5
Connect a video cable to the
VCR and the
VIDEO VCR OUT
6
Connect a video cable to the
VCR and the
VIDEO VCR IN
7
Connect a video cable to the
and the /
TV MONITOR OUTPUT VIDEO
To switch between viewing input from your VCR and input from your
HDT101, change your A/V receiver's video inputs.
/ connector on the HDT101
S PDIF OUT
/ ), the left / right
S PDIF OUT
connector on the HDT101 and
VIDEO
VCR AUDIO OUT R
INPUT AUDIO R
OUTPUT AUDIO OUT R
VCR AUDIO IN R
connector on the stereo
INPUT VIDEO
connector on the A/V receiver.
connector on the stereo
OUTPUT VIDEO
connector on the A/V receiver.
connector on the stereo TV
INPUT VIDEO
connector on the A/V receiver.
35
and
L
and
L
and
L
and
L