Adding a Channel
If you wish to add a specific channel to your program list or you have
made minor adjustments to your antenna, follow these steps for adding a
single channel:
1
Press
on the remote control. The Menu screen is displayed.
MENU
2
Highlight Installation and press
displayed.
3
Enter your four-digit password. If you have not yet created your own
password, enter the default password: 0000. The Installation menu is
displayed.
If you wish to change your password, see "Changing Your
Password" on page 25.
4
Highlight Manual Scan and press
is displayed:
5
Press the number keys on the remote control to enter the channel
number. Press the
If the channel is successfully added, the "Get Channel Success"
message is displayed.
. The Password window is
SELECT
. The Manual Scan window
SELECT
key and then press
SELECT
27
to start the scan.