Panasonic GD90 Service Manual page 34

TECHNICAL SPECIFICATIONS
GSM 1800 Half rate speech
The reference sensitivity performance in terms of frame erasure, bit error, or residual bit error rates (whichever is
appropriate) is specified in the following table, according to the propagation conditions.
Channels
TCH/HS (FER)
TCH/HS class Ib (BFI=0)
TCH/HS class II (BFI=0)
TCH/HS (UFR)
TCH/HSL class Ib ((BFI or UFI)=0)
Blocking:
Measurement Conditions:
Wanted carrier is 3dB above reference sensitivity.
Interferer is CW
Spurious response exceptions:
6 exceptions are permitted IN band 915 - 980MHz
24 exceptions are permitted OUTSIDE band 915 - 980MHz.
Intermodulation Characteristics:
Interferer Level (f1 & f2) dBm
-49
Issue 1
Revision 0
Propagation Conditions
TUhigh
Test limit
error rate
%
4.706
0.426
7.725
6.383
0.291
Frequency
FR ±600 kHz to FR ±800 kHz
FR ±800 kHz to FR ±1.6 MHz
FR ±1.6 MHz to FR ±3 MHz
915 MHz to FR -3 MHz
FR ±3 MHz to FR 980 MHz
FR ±600 kHz to FR ±800 kHz
1785 MHz to FR - 3 MHz
835 MHz to <915 MHz
>980 MHz to 1000 MHz
100 kHz to <835 MHz
>1000 MHz to 12.75 GHz
100 kHz to 1705 MHz
>1705 MHz to<1785 MHz
>1920 MHz to 1980 MHz
>1980 MHz to 12.75 GHz
Propagation Conditions
RA
Minimum Test limit
no. of error rate
samples %
12750
141000
25500 8735 20000
9400
206000
Small MS level in dBµVemf()
GSM 900
70 70
70 70
80 80
90 -
90 -
- 87
- 87
113 -
113 -
90 -
90 -
- 113
- 101
- 101
- 90
Interferer Frequencies (f1 & f2)
Wanted frequency = 2f1 - f2,
and |f1 - f2| = 800 kHz
Section 5
– 28 –
Propagation Conditions
HT
Minimum Test limit Minimum
no. of error rate
samples %
7600 20000
GSM 1800
MCUK990801C8
no. of
samples
Service Manual