Public Man Machine Interface (Mmi); Call Hold; Call Waiting - Panasonic GD90 Service Manual

3.9 Public Man Machine Interface (MMI)

It is possible to operate all GSM telephones in the same way using the Public MMI. The following operations will work with all
GSM telephones. However, this information is restricted to those operations that are supported by GD90.
The * and # in the following procedures should be replaced by
D E
replaced with and keys.
3.9.1 Reading Phonebook Memory Location
# <MEMORY LOCATION>
Leading zeros can be left out of the location number, e.g. 007 can be 7.
3.9.2 Presentation of IMEI
* # 0 6 #
3.9.3 Security
Change PIN * * 0 4 * <OLD PIN> * <NEW PIN> * <NEW PIN> #
Change PIN2 * * 0 4 2 * <OLD PIN2> * <NEW PIN2> * <NEW PIN2> #
Unblock PIN * * 0 5 * <PIN UNBLOCKING KEY> * <NEW PIN> * <NEW PIN> #
Unblock PIN2 * * 0 5 2 * <PIN2 UNBLOCKING KEY> * <NEW PIN2> * <NEW PIN2> #

3.9.4 Call Hold

Place a call on hold
Recall a held call
Make a second call
Swap between two held calls
End held call
End active call
Reject incoming call

3.9.5 Call Waiting

Enable Call Waiting
Disable Call Waiting
Call Waiting Status
MCUK990801C8
Service Manual
*
2 <SND>
2 <SND>
<TELEPHONE NUMBER> <SND>
2 <SND>
O <SND>
1 <SND>
0 <SND>
* 4 3 * # <SND>
# 4 3 * # <SND>
* # 4 3 * # <SND>
Section 3
– 9 –
OPERATING INSTRUCTIONS
#
and , respectively. Also <SND> and <END> should be
Issue 1
Revision 0