Basic Functions; Plug And Play - Philips FW-C155 Owner's Manual

Basic Functions

STANDBY
ON
ECO
POWER
DIGITAL
SOUND CONTROL
CD
DSC
OPEN/
CLOSE
DISC
CHANGE
IMPORTANT!
Before you operate the system, complete
the preparation procedures.

Plug and Play

Plug and Play allows you to store all available
radio stations automatically.
First time setup/power up
1
When you turn on the main supply, "AUTO
INSTALL - PRESS PLAY" is displayed.
2
PressÉ Å on the system to start installation.
"INSTALL" is displayed, followed by "TUNER"
and "AUTO".
starts flashing.
PROG
All available radio stations with sufficient signal
strength will be stored automatically, starting
from FM and followed by MW band.
When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
To reinstall Plug and Play
1
In standby or demonstration mode, press and
holdÉ Å on the system until "AUTO INSTALL
- PRESS PLAY" is displayed.
2
PressÉ Å again to start installation.
All previously stored radio stations will be
replaced.
12
BAND TAPE 1 • 2
TUNER TAPE
CD 2 CD 3
SEARCH •TUNING PLAY• PAUSE SEARCH •TUNING
PREV/ PRESET STOP• CLEAR / DEMO STOP NEXT/ PRESET
DYNAMIC
BASS BOOST
PROGRAM CLOCK•TIMER DIM MODE
MASTER VOLUME
VOLUME
To exit without storing the Plug and Play
Press Çon the system.
If you do not complete the Plug and Play
installation, the function will be restarted when
you next turn on the main supply again.
Notes:
– When the power is turned on, the disc tray may
open and close to initialise the system.
– If no stereo frequency is detected during
Plug and Play, "CHECK ANTENNA" will be
displayed.
– During Plug and Play, if no button is pressed
within 15 seconds, the system will exit Plug and
Play mode.
2
CD 1/2/3 TUNER TAPE 1/2 DIM
REPEAT SHUFFLE SLEEP
VOL
í ë
Ç É Å
á á
DSC DBB MUTE
MUTE NEWS/TA