Radio Reception; Tuning To Radio Stations; Storing Preset Radio Stations; Automatic Preset Programming - Philips FW-C155 Owner's Manual

Radio Reception

STANDBY
ON
ECO
POWER
DIGITAL
SOUND CONTROL
CD
DSC
OPEN/
CLOSE
DISC
CHANGE

Tuning to radio stations

1
Press TUNER to select TUNER mode.
"TUNER" is displayed. A few seconds later, the
current radio frequency will appear on the
display.
If an FM station is received in stereo,
displayed.
2
Press TUNER again to select the desired
waveband : FM or MW.
3
Press and hold à or á until the frequency
indication starts to change, then release.
The display will show "SEARCH" until a radio
station with sufficient signal strength is found.
4
Repeat step 3 if necessary until you find the
desired radio station.
To tune to a weak station, press à or á briefly
and repeatedly until optimal reception found.
18
BAND TAPE 1 • 2
TUNER TAPE
CD 2 CD 3
SEARCH •TUNING SEARCH •TUNING
PLAY• PAUSE
PREV/ PRESET STOP• CLEAR / DEMO STOP NEXT/ PRESET
DYNAMIC
BASS BOOST
PROGRAM CLOCK•TIMER DIM MODE
is
MASTER VOLUME
VOLUME

Storing preset radio stations

You can store up to 40 preset radio stations in
the memory.

Automatic Preset Programming

Plug and Play setting (refer to "Basic Functions -
Plug and Play").
OR
1
Press TUNER to select TUNER mode.
To begin automatic preset from a desired
preset number
Press í or ë to select the desired preset
number.
If a radio station has been stored in one of
the presets, it will not be stored again under
another preset number.
2
Press and hold PROGRAM until "AUTO" is
displayed.
starts flashing.
PROG
All available radio stations with sufficient signal
strength will be stored automatically, starting
from FM and followed by MW band.
When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
2
CD 1/2/3 TUNER TAPE 1/2 DIM
REPEAT SHUFFLE SLEEP
VOL
ë
í
É
Ç Å
á á
DSC DBB MUTE
MUTE NEWS/TA