Panasonic SR-SPX103 Operating Instructions Manual page 18

What to do when...
O
If the suggestions on P.32–33 do not bring about any
improvement, you can change the settings.
O
Buzzers may sound during operating, however operations
should be continued.
O
Steps 2, 3 and 4 must each be completed within 16 seconds.
When no operation is performed for 16 seconds, the display
returns to the current time. (Setting cannot be made.)
­ Please restart the procedure.
O
After the setting is completed, the display returns to the
current time.
O
To go back to the previous setting, follow the procedure again.
To increase the keep warm
If burning is a concern.
temperature. (60 to 74)
1 Press twice 1 Press
Press and select "Quick" Press
Flashing
O Select "Quick" under "White Rice". O Select "Quick" under "White Rice".
You will not hear
2 Press 2 Press
a beep.
You will not hear
Press Press
a beep.
Press Press
3 Press 3 Press
Set to
Press
4 Press
"74".
Pressing the button cycles through
4 Press
the temperatures (order of 74, 76,
72, 60, 74).
After 10 seconds
After 10 seconds
(
( )
Setting ends
automatically.
O If an odour is generated after the
change to "74", set to "76". If the rice
is discoloured or dry, set to "72".
O ECONAVI will not operate after the
change. Steam will not be injected
when rice is kept warm.
O The default setting is "60".
O If the setting is changed back to "60",
the setting of "If the keep warm state
is a concern." (P.35) is also changed
back to "Ho:02".
34
If the boiling sound is
a concern when keeping
rice warm.
(Stop steam injection.)
twice 1 Press
and select "Quick" Press
Flashing
O Select "Quick" under "White Rice".
You will not hear You will not hear
2 Press
a beep. a beep.
You will not hear You will not hear
Press
a beep. a beep.
Press
Select
3 Press
"02".
O There is no "03" setting.
Press
Set to
"So:Lo".
4 Press
Setting ends )
After 10 seconds
automatically.
( Setting ends
automatically.
O After the change, no steam will be
used during the keep warm state.
To stop the buzzer sounding
(end sound) during cooking,
reheating and cleaning.
twice 1 Press
and select "Quick" Press
Flashing
O Select "Quick" under "White Rice".
2 Press and hold down
(for approximately 5 seconds)
Select
O This change does not switch off the
"04".
button sounds.
Delete
"Steam".
)
* This setting is not available when increasing the keep warm
temperature.
If the keep warm state is a concern.
(
If there is a large amount of mist on the
Inner Lid and Inner Pan.
The rice has become discoloured or dry.
twice 1 Press twice
and select "Quick" Press and select "Quick"
Flashing Flashing
O Select "Quick" under "White Rice".
2 Press You will not hear a beep.
Press You will not hear a beep.
Press
3 Press Select "06".
O There is no "03" and "05" setting.
Press
Q When there is a large quantity of mist.
4
Press Set to "Ho:03".
After 10 seconds
( Setting ends automatically.)
Q When rice becomes discoloured or dry.
Press Set to "Ho:01".
After 10 seconds
( Setting ends automatically.)
O Change to "Ho:03", the keep warm temperature is also
changed from 60 to 74. ECONAVI will not operate after the
change. Steam will not be injected when rice is kept warm.
O The default setting is "Ho:02".
)
35