Uniden PRO 520XL Manual page 4

3. CH9 Switch
Switches the radio over to channel 9.
4. TX LED
Indicates when the radio is transmitting.
5. S/RF (Signal/RF) Meter
Shows the strength of the received signal or the RF output.
6. Channel Indicator
Displays the channel currently in use.
7. Microphone Jack
Connects to the included detachable electret microphone.
8. Volume Control
Powers on the radio and adjusts the volume.
9 Squelch knob
Adjusts the level at which the radio squelches or suppresses weak
radio signals.
10. RF Gain Knob
Adjusts the level of the signal reception.
11. Channel Selector
Selects which channel the radio will transmit or receive on.
Back
12. Model label
Shows the model
number, FCC ID
number and serial
number.
13. Antenna
Connector
Connects to a
male PL-259
external antenna
cable (antenna
sold separately).
14. PA Speaker Jack
See Connecting external speakers, below.
15. External Speaker Jack
See Connecting external speakers, below.
16. 12 Volt DC Power Cord
17. Fuse casing
Microphone
18 Push-to-talk (PTT) button
12
MODEL: PRO520XL
FCC ID
SERIAL NO:
4
13 14
18
15
16
17