English - Bosch ALR 900 Operating Instructions Manual

24 | Polski 2 |
12 164

English

– after striking a foreign object. Inspect the
machine for damage and make repairs as
necessary,
– if the machine starts to vibrate abnormally
(check immediately).
Maintenance
Keep all nuts, bolts and screws tight to be
sure that the machine is in safe working con-
dition.
Check the catcher frequently for wear or de-
terioration.
Examine the machine and replace worn or
damaged parts for safety.
Ensure replacement parts fitted are Bosch
approved.
Always wear gardening gloves when handling
or working near the sharp tines/blade.
Power supply
The voltage indicated on the rating plate
must correspond to the voltage of the power
source.
We recommend that this equipment is only
connected into a socket which is protected
by a circuit-breaker that would be actuated
by a 30 mA residual current.
Only use or replace power supply cables for
this unit which correspond to the types indi-
cated by the manufacturer. See the operat-
ing instructions for the order no. and types.
Never touch the mains plug with wet hands.
Do not run over, crush or pull the power sup-
ply cable or extension lead, otherwise it may
be damaged. Protect the cable from heat, oil
and sharp edges.
The extension lead must have a cross section
in accordance with the operating instruc-
tions and be protected against splashed wa-
ter. The connection must not be in water.
Always wear gardening gloves when handling
or working near the sharp tines/blade.
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
Intended Use
This product is intended for domestic, lawn rak-
ing, scarifying or verticutting of lawn.
At higher height of cut level the product is in-
tended for collection of leaves in the lawn area.
Technical Data
Lawnraker / Verticutter
Article number
Rated power input
Cutting width
Grassbox, capacity
Cutting system
– Double wound tines
– Pivoting blades
Collection system
Height of cut mm
Weight according to EPTA-Procedure
01/2003
Serial number
F 016 L70 675 | (11.10)
Delivery Scope
Carefully remove the machine from its packag-
ing and check if the following parts are com-
plete:
– Lawnraker (ALR 900)/Verticutter
(AVR 1100)
– Handle bottom
– Handle top
– Grassbox top
– Grassbox bottom
(packed inside grassbox top)
– 4 Bolts
– 4 Wing nuts
– 2 Cable clips
– Operating instructions
When parts are missing or damaged, please con-
tact your dealer.
When fully assembled the machine weighs ap-
proximately 9.9–10.4 kg. If necessary, obtain
assistance to remove from packaging.
Take care when removing from packaging or car-
rying the machine to the lawn, as the
tines/blades are sharp.
Product Features
The numbering of the components shown refers
to the representation of the machine on the
graphic pages.
1 Handle top
2 Switch lever
3 Safety button
4 Power plug **
5 Cable restraint
6 Handle bottom
7 Grassbox
8 Ventilation slots
9 Height of cut lever
10 Serial number
** country specific
Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
ALR 900 AVR 1100
3 600 H8A 0.. 3 600 H8A 1..
W 900
cm 32
l 50
–
Jet Collect Jet Collect
+10/+5/0/-5 +5/0/-5/-10
kg 9.9
See serial number 10 (type plate) on the machine
Bosch Power Tools
1100
32
50
–
10.4