Table of Contents
Advertisement
2
2a. SIGNAL. An indicator lights up when a satellite signal is present. Green
indicates a good signal. Red indicates no signal.
2b. DOLBY DIGITAL
a signal using Dolby
2c. MAIL. This indicator lights up if you have an unread message in the
mailbox.
2d. TIMER. A steady light indicates the timer system is set. The indicator
flashes when the timer system is within two minutes of being activated or if
it is active.
2e. REMOTE. An indicator dot blinks each time you press a key on the
remote control.
®
3. TVPASS
CARD. In the event of certain types of data security problems, your
service provider may decide to utilize an authorization feature called TVPass card.
This plastic card (smaller than a credit card) fits into a slot on the lower left corner
of the receiver's front panel.
4. GO BACK. Press this key to return to a previous menu or the last channel
viewed.
5. MENU. Press this key to display the Menu screen. Press it again to turn off the
Menu and return to a SAT mode. Press this key to control the receiver if you
cannot find your remote control.
6. ENTER. Press this key to select a highlighted menu option.
7. ARROW KEYS. Press these keys to highlight selections from menu screens.
The
k eys also change the channel.
v
14
®
. This indicator lights up when the unit is receiving
®
®
brand AC-3
Digital encoding.
Advertisement
Table of Contents
