Table of Contents
Advertisement
If You Press the GO BACK Key
If you press the Go BACK key from the Set Timer menu, a message screen will
appear. It will instruct you to do either one of the following:
• Cancel your changes by pressing the ENTER key.
• Press the GO BACK key again to return to the Set Timer menu.
How to Use the Confirm Timer Menu
The top portion of the
Confirm Timer menu
displays timer information
followed by up to four
options (the IPPV option
does not appear if the
program is not a subscription
program). Some programs
may be scheduled too far in
advance to immediately
determine this information.
1. Select option 1 (Confirm Timer and Leave) to complete your settings from the
Set Timer menu and to return to the Timers menu to complete additional settings.
Select this option only after you make sure the other options on this screen are
correct.
2. Select option 2 (Change Timer) to return to the Set Timer menu and change the
Timer option settings.
3. Option 3 (Approve Purchase) allows you to pre-purchase a program before
viewing time. This option only appears if your receiver is IPPV enabled. The
program's price is not always displayed.
• Select the Yes option to pre-purchase the program.
• If you select the No option, the program will not be pre-purchased. The timer
will be set for the program, but you will have to purchase the program at
viewing time.
• If the program cannot be taped, a no tape icon will appear.
If you have purchased a program or have used parental control features to lock
out channels, satellites, or program content, a Password screen will appear. You
will have to enter your password to finish setting the timer. Refer to the section
entitled "Setting Parental Controls and Passwords".
DSR315 User Guide
Options
47
Advertisement
Table of Contents
