Sony HT-NT3 Operating Instructions Manual page 22

Icon Explanation
[Easy Network Settings]
(page 28)
Runs [Easy Network Settings]
to make the basic network
settings.
[Resetting] (page 28)
Resets the system to the
factory settings.
[Software Update]
By updating your software to the latest
version, you can take advantage of the
newest functions.
During a software update, "UPDT"
appears in the front panel display. After
the update completes, the system
automatically reboots.
While the updating operation is in
progress, do not turn on or off the
system, or operate the system or TV.
Wait for the software update to
complete.
Note

For information about update functions,
visit the following website:
For customers in Europe and Russia:
www.sony.eu/support
For customers in other countries/regions:
http://www.sony-asia.com/section/
support

If your network condition is poor, visit the
website above to download the latest
software version and update via USB
memory.
 [Update via Internet]
Updates the system's software using
available network. Make sure network is
connected to the Internet. For details,
see "Network Function" (page 15).
22
GB
 [Update via USB Memory]
Updates software using USB memory.
Make sure that the Software Update
Folder is correctly named as "UPDATE".
The system can recognize up to 500
files/folders in a single layer including
the update files/folders.
[Screen Settings]
 [TV Type]
[16:9]: Select this when connecting to a
wide-screen TV or a TV with a
wide-mode function.
[4:3]: Select this when connecting to a
4:3 screen TV without a wide-mode
function.
 [Output Video Resolution]
[Auto]: Outputs video signal according
to the resolution of the TV or connected
device.
[480i/576i]*, [480p/576p]*, [720p],
[1080i], [1080p]: Outputs video signal
according to the selected resolution
setting.
* If the color system of the playback
content is NTSC, the video signals
resolution can be converted to [480i] and
[480p] only.