Reloop RMP-1 scratch Operation Manual page 22

NOTE:
There are two different play modes: An Endless mode and a One Shot mode.
The Endless mode is activated by pressing the Sampler button - 17 - once;
the sampler LED is continually illuminated. In Endless mode the
programmed sequence is played endlessly. The One Shot mode is activated
by pressing the Sampler button - 17 - again. The sampler LED flashes. In One
Shot mode the programmed sequence is played once only.
10. Scratch effect
11. Display
M
N
O
P
Q
22
To play the above programmed sequence, press the Sampler button -17-
(once for Endless mode / twice for One Shot mode) and press the Bank P.
button -9- to start play. To stop play, press the Sampler button -17- once again
until the LED is off.
Select the Scratch effect by pressing the Scratch button -10-. Now you can
scratch, forward, reverse and stop the track while in play mode with the
inside metal range of the Jog Wheel -18- like a vinyl record. The Jog Wheel
senses the touch of your fingers. Press the Scratch button a second time to
deactivate the scratch effect.
The Display -11- indicates all important functions of the player:
L K
A
J
B C
I
H
G
D E F