Using An Eye-Fi/Flashair Card - Canon PowerShot ELPH 180 User Manual

Adding All Images to a Photobook
z z Following the procedure in "Choosing
a Selection Method"
[Select All Images] and press the [ ]
button.
z z Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Removing All Images from a Photobook
z z Following the procedure in "Choosing
a Selection Method"
[Clear All Selections] and press the [ ]
button.
z z Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Still Images

Using an Eye-Fi/FlashAir Card

Before using an Eye-Fi/FlashAir card, always confirm that local use is
permitted.
(= 88), choose
You can send images from the camera to Wi-Fi compatible smartphones,
tablets, or computers by inserting a FlashAir card in the camera. Inserting
a prepared Eye-Fi card enables automatic wireless transfer of images to a
computer or uploading to a photo-sharing website.
Images are transferred by the Eye-Fi/FlashAir card. Refer to the card's user
manual or contact the manufacturer for instructions on preparing and using
Still Images
cards or resolving transfer problems.
•
(= 88), choose
When using an Eye-Fi/FlashAir card, keep the following points in
mind.
- Cards may continue to emit radio waves even after [FlashAir] is
set to [Off] (= 90) or [Eye-Fi trans.] is set to [Disable]
Remove the card before entering hospitals, aircraft, or other areas
where transmission is prohibited.
- When troubleshooting image transfer issues, check the card and
computer settings. For details, refer to the card's user manual.
- Poor network connections may delay or interrupt image transfer.
- Cards may become hot, due to their transfer functions.
- Battery power will be consumed faster than in normal use.
- Camera operation may become sluggish. To resolve this, try
setting [Eye-Fi trans.] to [Disable].
Before Use
Still Images Movies
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
(= 91).
Appendix
Index
89