Trying The Camera Out - Canon PowerShot ELPH 180 User Manual

Trying the Camera Out

Follow these instructions to turn the camera on, shoot still images or
movies, and then view them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
1
Turn the camera on.
z z Press the power button.
z z The startup screen is displayed.
2
Enter [
z z Press the [ ] button several times until
[
z z Aim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
z z
A scene icon is displayed in the upper
right of the screen.
z z Frames displayed around any detected
subjects indicate that they are in focus.
Still Images Movies
] mode.
] is displayed.
3
Compose the shot.
z z To zoom in and enlarge the subject, move
the zoom lever toward [ ] (telephoto),
and to zoom away from the subject, move
it toward [ ] (wide angle).
4
Shoot.
Shooting Still Images
Focus.
z z Press the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and AF frames are displayed to
indicate image areas in focus.
Shoot.
z z
Press the shutter button all the way
down.
z z As the camera shoots, a shutter sound
is played, and in low-light conditions, the
flash fires automatically.
z z Keep the camera still until the shutter
sound ends.
z z After displaying your shot, the camera will
revert to the shooting screen.
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Playback Mode Playback Mode
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
15