Usb Record; Record To Usb; Schedule Radio-To-Usb Record - Philips FWM6000 User Manual

9 USB record

$XGLR &' WUDFNV 03 ÀOHV UDGLR DQG DXGLR
IURP H[WHUQDO GHYLFHV DUH UHFRUGHG DV 86% ÀOHV
in .mp3 format.
7KH ÀUVW WLPH \RX UHFRUG WR 86% D IROGHU
called 'PHILIPS' is automatically created in the
USB device. Each time you record to USB,
WKH UHFRUGHG ÀOHV DUH VWRUHG LQ D VXEIROGHU LQ
the 'PHILIPS' folder. Files and sub-folders are
named numerically in the order in which they
are created.

Record to USB

Plug the USB device into the USB PLAY/REC
socket of this unit.
1
Prepare the source to record from.
‡ Disc - Select the disc source and load a
disc. You can select a track from which
a recording starts.
‡ Radio - Tune to a radio station.
‡ MP3 LINK/PC IN - Select the MP3 link/
PC IN source, then connect and start
to play an external device.
2
Press USB RECORD to start recording.
‡ For discs, press USB RECORD
repeatedly to select:
A >5(& 21(@ UHFRUG RQH WKH ÀUVW
current track is recorded.
B [REC ALL] (record all): all tracks/the
remaining tracks are recorded.
» Disc play starts automatically from the
beginning of the disc/the selected track,
and the recording starts.
‡ To stop recording, press .
Note
‡
If the USB device does not have enough memory to
VWRUH WKH DXGLR ÀOHV D PHVVDJH DERXW D IXOO PHPRU\ LV
displayed.
Schedule radio-to-USB
record
Schedule radio recordings in advance and you
can listen to your favorite programs at your
convenience.
Note
‡
A recording is activated only in the standby mode.
‡
The maximum length of a recording is 12 hours.
1
Ensure that you set the clock correctly.
2
Plug the USB device into the USB PLAY/
REC socket of this unit.
3
Tune to a radio station.
4
Press to switch to standby mode.
5
Press and hold SLEEP/TIMER for more
than 2 seconds.
» A prompt to select the source is
displayed.
6
Press TUNER repeatedly to select FM or
AM.
7
Press USB RECORD.
» The start timer digits are displayed and
begin to blink.
8
Press ALB/PRESET+/- to set the hour.
9
Press / to set the minute.
10
Press SLEEP/TIMER WR FRQÀUP
» The end timer digits are displayed and
begin to blink.
11
Press ALB/PRESET+/- to set the hour.
12
Press / to set the minute.
13
Press SLEEP/TIMER WR FRQÀUP
»
is displayed.
» At the scheduled times, the recording
begins and ends automatically.
» When the recording ends, the unit
switches to standby mode.
EN 17