Connect Speakers; Connect Power - Philips FWM6000 User Manual

2
Connect the AM loop antenna to the AM
jack on the back of the main unit.

Connect speakers

Note
‡
For optimal sound, use the supplied speakers only.
‡
Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
6SHFLÀFDWLRQV VHFWLRQ RI WKLV PDQXDO
Note
‡
Make sure that the colors of the speaker wires and
terminals are matched.
Insert the wire completely.
‡ Insert the right speaker wires to "R",
and left speaker wires to "L".
10 EN

Connect power

Caution
‡
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage set on the voltage
selector on the bottom panel of the unit.
‡
Ensure that the power supply socket used can
support at least 10A current loading.
‡
Before connecting the AC power cord, ensure that you
have completed all other connections.
1
If your power supply voltage is 110V-127V,
adjust the voltage selector (locate on the
bottom panel of the unit) to 110V-127V.
2
Connect the AC power cable to the wall
socket.