Table of Contents
Advertisement
•
Onboard Serial Port 1
The default value is 3F8/IRQ4.
Auto
BIOS will automatically setup the port 1 address.
3F8/IRQ4
Enable onboard Serial port 1 and address is 3F8.
2F8/IRQ3
Enable onboard Serial port 1 and address is 2F8.
3E8/IRQ4
Enable onboard Serial port 1 and address is 3E8.
2E8/IRQ3
Enable onboard Serial port 1 and address is 2E8.
Disabled
Disable onboard Serial port 1.
•
Onboard Serial Port 2
The default value is 2F8/IRQ3.
Auto
BIOS will automatically setup the port 2 address.
3F8/IRQ4
Enable onboard Serial port 2 and address is 3F8.
2F8/IRQ3
Enable onboard Serial port 2 and address is 2F8.
3E8/IRQ4
Enable onboard Serial port 2 and address is 3E8.
2E8/IRQ3
Enable onboard Serial port 2 and address is 2E8.
Disabled
Disable onboard Serial port 2.
•
Onboard Parallel port
The default value is 378/IRQ7.
378/IRQ7
Enable onboard LPT port and address is 378/IRQ7.
278/IRQ5
Enable onboard LPT port and address is 278/IRQ5.
Disabled
Disable onboard LPT port.
3BC/IRQ7
Enable onboard LPT port and address is 3BC/IRQ7.
•
Parallel Port Mode
The default value is SPP.
SPP
Using Parallel port as Standard Printer Port.
EPP
Using Parallel port as Enhanced Parallel Port.
ECP
Using Parallel port as Extended Capabilities Port.
ECP/EPP
Using Parallel port as ECP & EPP mode.
4-29
BIOS Configuration
Advertisement
Table of Contents
