•
Resources Controlled by
The default value is Manual.
Manual
User can set the PnP resource (I/O Address, IRQ & DMA
channels) used by legacy ISA DEVICE.
Auto
BIOS automatically use these PnP rescuers.
•
Reset Configuration Data
The default value is Disabled.
Disabled
Disable this function.
Enabled
Enable clear PnP information in ESCD.
•
IRQ (7,12,14,15) & IRQ (3,4,5,9,10,11,DMA(0,1,3,5,6,7) assigned to
The default value is "Legacy ISA" or "PCI/ISA PnP".
Legacy ISA
The resource is used by Legacy ISA device.
PCI/ISA PnP
The resource is used by PCI/ISA PnP device (PCI or ISA).
•
Used MEM base addr
The default value is N/A.
N/A
Disable the MEM. block using.
C800 ~ DC00
Select the MEM. block starting address.
•
Used MEM Length
The default value is 8K.
8K ~ 64K
Select the MEM. block size.
•
Assign IRQ For USB
The default value is Enabled.
Enabled
Assign a specific IRQ for USB
4-23
BIOS Configuration