Table of Contents
Advertisement
•
Typematic Rate (Chars / Sec)
The default value is 6.
6-30
Set the maximum Typematic rate from 6 chars. Per second
to 30 chars. Per second.
•
Typematic Delay (Msec)
The default value is 250.
250-1000
Set the time delay from first key to repeat the same key in
to computer.
•
Security Option
This category allows you to limit access to the system and Setup, or just to
Setup. The default value is Setup.
System
The system can not boot and can not access to Setup page
will be denied if the correct password is not entered at the
prompt
Setup
The system will boot, but access to Setup will be denied if
the correct password is not entered at the prompt
M
To disable security, select PASSWORD SETTING at Main Menu and
then you will be asked to enter password. Do not type anything and
just press <Enter>, it will disable security. Once the security is
disabled, the system will boot and you can enter Setup page freely.
•
PCI/VGA Palette Snoop
The default value is Disabled.
Enabled
For having Video Card on ISA Bus and VGA Card on PCI Bus.
Disabled
For VGA Card only.
•
Assign IRQ For VGA
The default value is Enabled.
Enabled
For having Video Card on ISA Bus and VGA Card on PCI Bus.
Disabled
For VGA Card only.
4-11
BIOS Configuration
Advertisement
Table of Contents
