Gigabyte GA-6BA User Manual page 55

Table of Contents

Advertisement

6BA
Swap Floppy Drive
The default value is Disabled.
Enabled
Floppy A & B will be swapped under DOS
Disabled
Floppy A & B will be normal definition
VGA Boot From
The default value is AGP.
AGP
VGA Boot From AGP
PCI
VGA Boot From PCI
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive installed is 40 or 80
tracks. 360 K type is 40 tracks 720 K, 1.2 M and 1.44 M are all 80 tracks.
The default value is Enabled.
Enabled
BIOS searches for floppy disk drive to determine it is 40 or
80 tracks. Note that BIOS can not tell from 720 K, 1.2 M or
1.44 M drive type as they are all 80 tracks
Disabled
BIOS will not search for the type of floppy disk drive by track
number. Note that there will not be any warning message if
the drive installed is 360 K
Boot Up NumLock Status
The default value is On.
On
Keypad is number keys
Off
Keypad is arrow keys
Typematic Rate Setting
The default value is Disabled.
Enabled
Enable Keyboard Typematic rate setting.
Disabled
Disable Keyboard Typematic rate setting.
4-10

Advertisement

Table of Contents
loading

Table of Contents