To Charge The Remote - GoPro Smart Remote User Manual

To Charge the Remote:

B
A
Step 1
Slide and hold the latch lever in
the direction of the arrow (A), then
pull the key out of the remote (B).
8
Step 2
Plug the charging cable into
the charging slot until it clicks.
Step 3
Connect the other end of the cable
to a computer or other USB power
source.
Note: Be sure that the computer is connected to a
power source. If the remote status display does not
indicate that the remote is charging, use a different
USB port.
The charging icon on the remote
status display shows a full battery
when charging is complete.
9