Getting Started; Charging The Smart Remote - GoPro Smart Remote User Manual

/ Getting Started

The Smart Remote lets you power your GoPro on/off, start/stop recording,
and change camera settings. The display, status light, Power/Mode button
[ ], Shutter/Select button [
in the same way as those on your camera.
The Smart Remote is waterproof to 32' (10m). However,
wireless connectivity does not work under water, so
the remote and cameras do not remain connected
if submerged.
* The Settings/Tag button and the Power/Mode button are not available on all
GoPro camera models.
6
], and Settings/Tag button* [ ] behave

CHARGING THE SMART REMOTE

We recommend charging your Smart Remote for one hour before
using it the first time. No damage occurs if it is used before being
fully charged. You can use the remote while it is charging.
The status display shows the remote's battery level while the
remote is powering on or charging.
Note: When the remote is searching for a camera, the battery drains faster. If you are not
using the remote during charging, be sure to turn it off to conserve battery power.
7