To Pair Your Remote And Your Hero+ Lcd Or Hero+ - GoPro Smart Remote User Manual

TO PAIR YOUR REMOTE AND YOUR HERO+ LCD OR HERO+:

1. Ensure that both camera and remote are powered off.
2. On your camera, complete these steps:
a. Press the Power/Mode button [
b. Press the Power/Mode button [
then press the Shutter/Select button [
c. Press the Shutter/Select button [
d. Press the Power/Mode button [
then press the Shutter/Select button [
18
] to power on your camera.
] to cycle to Setup mode, and
] to select it.
] to select Wireless.
] to cycle to REM CTRL, and
] to select it.
3. On the remote, complete these steps:
a. Power on the remote. If the remote was never paired with a camera,
it automatically begins pairing [
the Settings/Tag button [
A checked box [ ] appears on both screens once the devices
are paired.
b. To connect additional cameras, press the Shutter/Select button
[ ] to select Yes, and then repeat the pairing process.
c. When you are finished, press the Power/Mode button [
to No, and then press the Shutter/Select button [
]. Otherwise, press and hold
] for four seconds to begin pairing.
] to cycle
] to select it.
19