Capturing Video And Photos; To Capture Video Or Photos - GoPro Smart Remote User Manual

/ Capturing Video and Photos

Use the remote to capture video and photos with one camera or
multiple cameras.

TO CAPTURE VIDEO OR PHOTOS:

1. Press the Power/Mode button [
that you want.
2. Press the Shutter/Select [
If your camera goes out of range of the remote while you are recording,
recording continues until you stop it.
Note: If your HERO Session camera goes out of range while in Burst or Photo mode, the camera status
screen remains on. If the camera is still out of range after five minutes, the camera automatically powers off.
26
] repeatedly to cycle to the mode
] button.
PRO TIP: You can add HiLight Tags to quickly find highlights during
playback, sharing, and editing. While recording, press the Settings/Tag
[ ] button on the remote to add a HiLight Tag. If the remote is connected
to multiple cameras, HiLight Tags are added to video on all cameras.*
* HiLight Tags are not available on all GoPro camera models.
THE FOLLOWING FEATURES ARE NOT AVAILABLE WHEN USING
THE REMOTE WITH YOUR GOPRO:
• QuikCapture / One Button mode
• Continuous photo with multiple cameras*
• Manually capturing photos while recording video with
multiple cameras*
• HERO3+ and HERO3: The Settings/Tag button [
(to add a HiLight Tag or enter the Settings menu)
* This feature is available on HERO4 Silver and HERO4 Black when controlling a single camera.
] on the remote
27