Subout/Subwoofer; High-Pass Filter - Blaupunkt Frankfurt C70 Operating Instructions Manual

SUBOUT/SUBWOOFER

Subout/subwoofer
Setting the frequency and level
for the subwoofer
You can set the frequency and amplifier level
for a connected subwoofer. The settings you
make depend on the hifi system in your car
and the power of your subwoofer. Experiment
to find your ideal setting.
Press the AUD button 9.
Press the soft key 4 with the display
allocation "NEXT".
Press the soft key 4 with the display
allocation "SUB".
Press the or
between the frequencies "80 Hz" and
"100 Hz".
Set the desired amplifier level using the
button 7.
or
Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
button 7 to select

HIGH-PASS FILTER

High-pass filter
Setting the high-pass filter
If a subwoofer is connected to your car radio,
you can use a high-pass filter (HP-F) to sup-
press the output of lower frequencies through
the internal final amplifier and an external pre-
amplifier that may be connected. This filter
has five adjustment levels. The settings de-
pend on the unit installed in your car. Experi-
ment to find your ideal setting.
Press the AUD button 9.
Press the soft key 4 with the display
allocation "NEXT".
Press the soft key 4 with the display
allocation "HP-F".
Press the or
the high-pass filter on/off.
When the high-pass filter is activated,
select the desired amplifier filter, "FIL-
TER1" - "FILTER5" using the
button 7.
Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
button 7 to switch
or
71