Press + to enter the ALARMS menu. Press **+ to enter EVENT
alarms mode.
2. Press * until the EVENT alert you want to re-enable displays. Press +
+ to move to the alert enable/disable field.
3. Press * until J J J J (the enable alert icon) displays.
4. Press ) to set and exit.
To disable (erase) the alarm settings, follow these steps.
1. From the Standby screen, press and release *until ALARMS? displays.
Press + to enter the ALARMS menu. Press **+ to enter EVENT
alarms mode.
2. Press * until the EVENT alarm you want to disable displays. Press +,
then press * until -- (the disable alarm icon) displays. Press ) to set
and exit.
Storing Messages
Your pager can store up to 16 personal messages. Each stored message is
assigned a number, which displays when the message is stored. The first
message received is 1, the second is 2, and so on.
20