Connection To The Mains Supply - Russell Hobbs RHM2364SS User Manual

CONNECTION TO THE MAINS SUPPLY

For UK use only – PLUG
• As the colours of the wires in the mains lead of this appliance
may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
• The
GREEN/YELLOW
to the terminal which is marked with the letter E or by the earth
symbol or coloured
• The
BLUE wire is the NEUTRAL and must be connected to
• the terminal marked with the letter N or coloured BLACK.
• The
BROWN
• the terminal marked with the letter L or coloured RED.
• Always ensure that the plug cord grip is fastened correctly.
• If a 13A (BS1363) fused plug is used it must be fitted with a
13amp fuse conforming to BS1362 and be BSI or ASTA approved.
If the fuse cover is lost the plug must not be used until a
replacement is obtained from an electrical supplier.
If you need to remove the plug, cut it from the mains lead and
dispose of it. NEVER attempt to re-use this plug or insert it into a
socket outlet, as there is a very great risk of electrical shock.
wire is the EARTH and must be connected
GREEN or GREEN/YELLOW.
wire is the LIVE wire and must be connected to
37