Table of Contents
Advertisement
HOW TO USE THE MICROWAVE
2. Once you have turned the dial to select the appropriate setting, press the
'Start' button to confirm.
3. Turn the ''Timer/Weight/Auto Menu' dial to choose the food weight, these
are pre-set and listed in the above table.
4. Press the 'Start' button to commence cooking.
Make sure you monitor cooking progress as times can vary. Allow the food to
stand in the microwave for 1-2 minutes after the cooking cycle is complete.
Multi-sequence cooking function
For some recipes, results may be better if you wish to cook on different
power levels for different times, for one dish.
Note:
This can be used to set a maximum of two different stages. The auto
menu cannot be set as one of the multi-stage cooking functions.
For example, if you wanted to
microwave power for 7 minutes - the steps are as follows:
1. Press the 'Weight/Time Defrost' button once – the screen will display
'dEF1'
2. Turn the 'Timer/Weight/Auto Menu' dial to adjust the defrost weight to
500g.
3. Press the 'Power' button once.
4. Turn the 'Timer/Weight/Auto Menu' dial to choose 80% microwave power
until the display shows 'P80'.
5. Press the 'Start/+30Sec/Confirm' button to confirm.
6. Turn the 'Timer/Weight/Auto Menu' dial to adjust the cooking time to 7
minutes.
7. Press the 'Start/+30Sec/Confirm' button to start the cooking process.
defrost 500g of food, then cook it at 80%
24
Hide quick links:
Advertisement
Table of Contents
