Dialing Basics - Polycom SoundStation 6000 Quick Reference Manual

Hide thumbs Also See for SoundStation 6000:
Table of Contents

Advertisement

With AT&T Voice DNA, you don't need to use an out of network prefix (such as 9) when making calls.
Make a call
Make an internal call
Make a local call
Make a long distance
call
Make an international
call
Return the most recent
incoming call
Redial the last number
called
Redial a number called
earlier
Hold a call and resume a
call
To end a call
AT&T, the AT&T logo and all other AT&T marks contained herein are trademarks of AT&T Intellectual Property and/or AT&T affiliated companies. All other
marks contained herein are the property of their respective owners. The information in this document is provided by AT&T for informational purposes
only. AT&T does not warrant the accuracy or completeness of the information or commit to issue updates or corrections to the information. AT&T is not
responsible for any damages resulting from use of or reliance on the information.

Dialing Basics

1.
Do one of the following:
Press the Call button.
Press the New Call soft key.
Press the Speakerphone button.
2.
Enter the number, and then press the Dial soft key.
Enter the extension dialing prefix and the extension number.
Enter a 10-digit number, a 7-digit number within your own
area code, or a special number (such as 411 or 911).
Enter a 10-digit number. (You can enter 1 and the 10-digit
phone number, but 1 isn't required.)
Enter 011 (the international code) + country code + phone
number.
For more information, see the AT&T International Long Distance
Dialing Guide at www.att.com/gen/general?pid=1881.
1.
Press the Menu button.
2.
Select Features, Call Lists, and either Missed Calls or Received
Calls.
3.
Scroll to select the number you want, and then press the Dial soft
key.
Press the Redial button.
1.
Press the Menu button.
2.
Select Features, Call Lists, and Placed Calls. The Placed Calls
list appears in the display window.
3.
Select the number you want, and then press the Dial soft key:
1.
To put a call on hold, press the Hold soft key.
2.
To resume the call, press the Resume soft key.
Press the Call button or the End Call soft key.
© 2012 AT&T Intellectual Property. All rights reserved.
®
AT&T Voice DNA
Quick Reference Guide
®
for the Polycom
SoundStation
®
IP 6000 Phone
Page 3

Advertisement

Table of Contents
loading

Table of Contents