System Requirements - Fujitsu ScanSnap S1300i Getting Started

System Requirements


Windows
Windows
Operating
Windows
system
Windows Vista
Windows
®
Intel Core
higher
CPU
(Recommended: Intel
2.5 GHz or higher)
32-bit: 1 GB or more
(Recommended: 4 GB or more)
Memory
64-bit: 2 GB or more
(Recommended: 4 GB or more)
Windows
Display 1024 × 768 pixels or higher
resolution Windows
(*4) Windows
800 × 600 pixels or higher
2850 MB or more of free hard disk
space
Hard disk (1 GB or more is required for
space ScanSnap S1300i Deluxe. For
(*5) details, refer to the manual of
Rack2-Filer Smart with Magic
Desktop.)
USB port USB3.0(*6)/USB2.0/USB1.1
*1: The software bundled with the ScanSnap
operates as a desktop application.
*2: Service Pack 2 or later is required.
*3: Service Pack 3 or later is required.
*4: When the font size is large, some screens may
not be displayed properly.
In that case, use a smaller font size.
®
*5: For Windows 8.1, Windows
®
Vista , and Windows
Framework 3.5 SP1 is not installed, a
maximum of 500 MB of additional free hard
disk space is required.
*6: When using a USB 3.0 port, data is transferred
at the same speed as USB 2.0.
®
8.1 (32-bit/64-bit) (*1)
®
8 (32-bit/64-bit) (*1)
®
7 (32-bit/64-bit)
®
(32-bit/64-bit) (*2)
®
XP (32-bit) (*3)
2 Duo 2.2 GHz or
™
®
Core i5
™
® ®
8.1/Windows 8:
® ®
7/Windows Vista /
®
XP:
®
8, Windows
® ®
XP, if Microsoft .NET
ATTENTION
If the system requirements above are not

satisfied, the ScanSnap may not operate.
Scanning speed will slow down in the following

cases:
- The CPU or the memory does not meet the
required specifications
- The USB port or the USB hub is version 1.1
The actual increase in used disk space after

installation and the required disk space for
installation may differ from each other
depending on your Windows
management.
Installation

1.
Turn on the computer and log on as a user
with Administrator privileges.
2.
Insert the Setup DVD-ROM into the DVD-
ROM drive.
 The [ScanSnap Setup] dialog box
appears.
HINT
If the [ScanSnap Setup] dialog box does
not appear, double-click "ScanSnap.exe"
in the DVD-ROM via Windows Explorer.
3.
Click the [Install Products] button.
 The [Install Products] dialog box appears.
3
®
system disk