Network Settings - Samsung GX-SM650SJ User Manual

Settings
 System

Network settings

Before you begin, contact your ISP (Internet Service Provider) to find out if your IP address is static. If it
is dynamic and you have a wired network, we recommend using the Automatic configuration procedures
described below.
Connect the STB to your router using a LAN cable before you start the configuration procedure.
To begin configuring your network connection, follow these steps:
◈ Automatic
1.
Press the MENU button on the remote control.
2.
Select [Settings] > [System], and then press the ▶ button.
3.
Select [Network settings], and then press the ▶ button.
4. Select [Auto] in the Network Settings screen.
5.
Select [OK], and then press the v button. The STB detects the wired connection, verifies the network
connection and then connects to the network.
◈ Manual
If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network
Settings parameters manually.
1.
Select [Manual] in the Network Settings screen.
2.
Enter IP address, Mask, Gateway and DNSs manually.
\ You can get the Network parameters from your Internet provider.
3.
Select [OK] to save settings, and then press the v button.
47