Scene File Setting; Light Control Menu - Hitachi KP-D5000 Operation Manual

Scene file setting

The Scene file is a function to record various mode settings and the
adjusted values of the camera at file.
1) Press the Set button for at least 2 seconds to display the
main menu on the monitor screen.
2) Use UP and Down buttons to move the cursor to MAIN
MENU. The scene file setting data blinks. In this state, push
the Set button to change the scene file.
Set button： ： ： ： FILE1→FILE2→FILE3
→FILE4→FILE5
Factory setting is FILE1.
Scene file factory setting
Scene file No.
LIGHT CONTROL
MODE
AREA
AIE
AGC
DNR
SHUTTER SPEED
SENS UP
B/W MODE
ENHANCE
FOG ADJUST
＊The other settings besides this table will be same as factory setting of file1.

Light control menu

Light control mode setting
1) Press the Set button for longer than 2 seconds to
display the Main menu.
2) Use the Up and Down buttons to move the cursor to
LIGHT CONTROL. [AVE]/[BLC]/[PK/AVE] flashes.
3) In this state, push the Set button to display LIGHT
CONTROL MENU.
4) When the cursor is at MODE, push the Set button to change
control modes.
Set button： ： ： ： AVERAGE→BLC→PEAK/AVE
AVE (Average mode)
This mode measures the average luminance of the entire
screen and controls the exposure level. This is default mode.
BLC (Back Light Control mode)
This mode controls the exposure level at the luminance level
of the specified area. (It can be selected from 9 areas).
PK/AVE (Peak/Average mode)
This mode uses the peak luminance together with average
and controls the exposure level. (The ratio of peak level and
average level can be changed.)
Note
In case of using a video signal type lens, follow the
manual to change setting of sensitivity of the lens.
1 2
Fog
High sensitivity
adjustment(color）
setting
setting
AVERAGE AVERAGE
－－－ －－－
OFF OFF
51 31
ＨＩ ＨＩ
1/60 1/60
OFF OFF
OFF OFF
OFF AUTO
> > > >
◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ (FILE1) (FILE1) (FILE1) (FILE1)
ＭＡＩＮ ＭＡＩＮ ＭＡＩＮ ＭＡＩＮ ＭＥＮＵ ＭＥＮＵ ＭＥＮＵ ＭＥＮＵ
ＬＩＧＨＴ ＬＩＧＨＴ ＬＩＧＨＴ ＬＩＧＨＴ ＣＯＮＴＲＯＬ： ＣＯＮＴＲＯＬ：AVE ＣＯＮＴＲＯＬ： ＣＯＮＴＲＯＬ： AVE AVE AVE
ＡＧＣ ＡＧＣ ：ＯＮ ：ＯＮ
ＡＧＣ ＡＧＣ ：ＯＮ ：ＯＮ
ＳＨＵＴＴＥＲ ＳＨＵＴＴＥＲ ＳＰＥＥＤ： ＳＨＵＴＴＥＲ ＳＨＵＴＴＥＲ ＳＰＥＥＤ： ＳＰＥＥＤ： ＳＰＥＥＤ：１ １ １ １ ／ ／ ／ ／ ６０
ＳＥＮＳ ＵＰ ＳＥＮＳ ＵＰ ：ＯＦＦ ：ＯＦＦ
ＳＥＮＳ ＳＥＮＳ ＵＰ ＵＰ ：ＯＦＦ ：ＯＦＦ
Ｂ／Ｗ ＭＯＤＥ Ｂ／Ｗ ＭＯＤＥ ：ＯＦＦ ：ＯＦＦ
Ｂ／Ｗ Ｂ／Ｗ ＭＯＤＥ ＭＯＤＥ ：ＯＦＦ ：ＯＦＦ
ＷＨＩＴＥ ＷＨＩＴＥ ＷＨＩＴＥ ＷＨＩＴＥ ＢＡＬＡＮＣＥ：ＡＴＷ ＢＡＬＡＮＣＥ：ＡＴＷ ＢＡＬＡＮＣＥ：ＡＴＷ ＢＡＬＡＮＣＥ：ＡＴＷ
ＣＡＭＥＲＡ ＣＡＭＥＲＡ ＴＩＴＬＥ ＴＩＴＬＥ ：ＯＦＦ ：ＯＦＦ
ＣＡＭＥＲＡ ＣＡＭＥＲＡ ＴＩＴＬＥ ＴＩＴＬＥ ：ＯＦＦ ：ＯＦＦ
ENHANCE ENHANCE ↵ ↵ ↵ ↵ ENHANCE ENHANCE
ＳＵＢ ＭＥＮＵ ＳＵＢ ＭＥＮＵ ↵ ↵ ↵ ↵
ＳＵＢ ＳＵＢ ＭＥＮＵ ＭＥＮＵ
ＥＮＤ ＥＮＤ
ＥＮＤ ＥＮＤ
Main menu
3 4
Fog
Back light
adjustment(B/W）
correction setting
setting
AVERAGE BLC
－－－
NO.1
OFF MID
31 31
ＨＩ ＨＩ
1/60 1/60
OFF OFF
ON OFF
AUTO OFF
17
◆ ◆ ◆ ◆
ＬＩＧＨＴ ＬＩＧＨＴ ＬＩＧＨＴ ＬＩＧＨＴ ＣＯＮＴＲＯＬ ＣＯＮＴＲＯＬ ＣＯＮＴＲＯＬ ＣＯＮＴＲＯＬ
> > > >
ＭＯＤＥ ＭＯＤＥ ＭＯＤＥ ＭＯＤＥ ：ＡＶＥＲＡＧＥ ：ＡＶＥＲＡＧＥ ：ＡＶＥＲＡＧＥ ：ＡＶＥＲＡＧＥ
ＬＥＶＥＬ ＬＥＶＥＬ ＬＥＶＥＬ ＬＥＶＥＬ ： ： ： ： ０００
ＡＩＥ ＡＩＥ ＡＩＥ ＡＩＥ : : : : Ｏ Ｏ Ｏ Ｏ FF
ＲＥＴ ＲＥＴ
ＲＥＴ ＲＥＴ
ＥＮＤ ＥＮＤ ＥＮＤ ＥＮＤ
Light control menu [AVERAGE]
Video level adjustment
The optimum video level is to factory setting(000).
If necessary, the level can be changed as foIIows.
1) Use the Up and Down buttons to shift the cursor to LEVEL
and press the Set button. The adjustment value at the right
of LEVEL flashes.
2) Change the video level by pressing the Up and Down
buttons.
Adjustment value range : -128~000~+127
For factory setting(000), hold down both the Up and Down
buttons simultaneously for 2 seconds.
When the cursor is blinking, pressing Set button will stop
blinking and setting value will be fixed. In this case, the
cursor moves to AIE.
18
......Scene file setting
......Light control menu
↵ ↵ ↵ ↵
↵ ↵ ↵ ↵ ......AGC setting menu
......Shutter speed setting
６０ ６０ ６０
......Sensitivity enhancement Setting
......Color-B/W mode setting
↵ ↵ ↵ ↵
......White balance setting
↵ ↵ ↵ ↵
......Camera title menu
↵ ↵ ↵ ↵
......Enhance setting menu
......Sub menu
......End (Menu display off）
5
Stored high
sensitivity setting
AVERAGE
－－－
OFF
51
ＨＩ
1/60
AUTOx16
OFF
OFF
◆ ◆ ◆ ◆
ＭＥＮＵ ＭＥＮＵ ＭＥＮＵ ＭＥＮＵ
......Light control mode display
......Video level adjustment(-128～000～+127）
０００ ０００ ０００
↑ ↑ ↑ ↑ ......AIE mode
FF FF FF
......Return to Main menu
......End (Menu display off）