Using Aux In Function - Karaoke Night KN355 User Manual

connections and the Yellow is for video. Modern flat panel digital TV sets and home music systems are usually
equipped with corresponding color-coded RCA jacks to assist correct connections. Make sure that you have a
CD+G disc in the karaoke system playing when you are making this connection. You will know you have the
proper settings on your TV as soon as you see the lyrics on the screen.
Video connection
Please follow these steps to display CD+G lyrics on an external TV screen:
1. Locate the color-coded patch cords.
2. Connect video cable (Yellow) to the VIDEO OUT on the back of the karaoke system.
3. Connect the other end of the video cable (Yellow) to the VIDEO / A/V INPUT on your TV.
4. Turn on both units and start playing CD+G disc.
CONNECTING AUDIO TO TV OR HOME STEREO
Connect the unit to your TV or home stereo system using the White and Red connections on the supplied patch
cord. Plug the white end of the patch cord into the white AUDIO OUT jack on the unit. Plug the red end of the
patch cord into the red AUDIO OUT jack on the unit. Now connect the other end of the cable's white (left
channel) and red (right channel) plugs to your TV or home stereo system's 'AUDIO INPUT', 'LINE IN' or 'AUX
IN' jacks. After connecting, you should be able to play music from a CD/CD-R/CD-RW/CD+G disc through the
connected TV or home stereo system.
This feature allows you to listen to an external audio source through the speaker of this unit.
1. Plug a 3.5mm audio cable (not included) into the headphone jack of your external audio player (not
included) and connect the other end (3.5mm plug) into the AUX IN jack on the rear side of this unit.
2. Make sure both units are turned on.
3. Play a song on your MP3 or MP4 player.
4. Adjust the volume control of your audio player and then the MASTER VOLUME CONTROL of the unit to
obtain the desired audio sound level.
5. Turn off both the external audio player and this unit after use.

USING AUX IN FUNCTION

6