Table of Contents
Advertisement
The KN103 operates using the supplied AC Adapter (Operate at 120V ~ 60Hz) or 8 X 'C' size (UM-2)
batteries (not included).
AC ADAPTER OPERATION
Note: Only use the supplied adapter.
1. Plug the AC adapter into normal AC power outlet socket.
2. Insert the DC plug of the AC adapter cord into the DC IN JACK (#20) at the back of the unit.
3.
When the unit is operated using AC adapter, the battery source will automatically be disconnected.
WARNING: Before connecting to the power supply, ensure that the supply corresponds to the information on
the rating label at the back of the apparatus.
BATTERY OPERATION
Note:
Disconnect AC adapter before installing batteries.
For best performance and longer operating time, we recommend the use of alkaline batteries.
1. Remove the BATTERY DOOR (#21) on the back of the unit.
2. Follow the polarity diagram shown in the BATTERY COMPARTMENT to insert 8 X 'C' size (UM-2)
batteries and close the door.
BATTERY WARNINGS
1. Be sure that the batteries are installed correctly. Wrong polarity may damage the unit.
2. Use only the size and type of batteries specified.
3. Do not mix old and new batteries.
4. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
5. For better performance and longer operating time, we recommend the use of alkaline-type batteries.
6. If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking batteries
can cause damage to the unit and may void the warranty.
7. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow
battery manufacturer's directions).
8. Do not dispose of batteries in fire, batteries may leak or explode.
1.
Press the POWER BUTTON (#18) once to turn on KN103. The POWER INDICATOR (#14) will light.
2.
Open the CD DOOR (#3). Carefully place an audio CD with its label side outward in the CD compartment
and close the CD Door (#3).
3.
The total number of tracks on the CD will appear in the LED Display (#12) after a few seconds.
4.
Press the PLAY/PAUSE BUTTON
start playing from the first track.
5.
Adjust the MASTER VOLUME CONTROL (#5) to obtain the desired sound level from the built-in
SPEAKERS (#1).
6.
T o suspend playing, press the PLAY/PAUSE BUTTON
(#10) will flash. T o resume playing, press the PLAY/PAUSE BUTTON
7.
You can choose to play your favorite track directly by pressing either the
(#9) or
BACK-SKIP BUTTON
8.
T o locate a particular passage within a track, keep pressing the
BACK-SKIP BUTTON
Note: Low level audio will be heard during the search process to assist in locating correct point in the
track.
POWER SOURCE
CD OPERATION
(#8). The PLAY/PAUSE INDICATOR (#10) will light and the CD will
(#15). The LED Display (#12) will indicate the track number selected.
(#15) until it is found.
E-4
(#8) again. The PLAY/PAUSE INDICATOR
(#8) again.
FORWARD-SKIP BUTTON
FORWARD-SKIP BUTTON
(#9) or
Advertisement
Table of Contents
