JVC KW-R910BT Instruction Manual page 17

PHONE
Selects the phone or audio device to connect or disconnect. " " appears in
front of the device name.
AUDIO
APPLICATION Shows the connected phone name using the JVC Smart Music Control *
app. " " appears in front of the device name.
DELETE PAIR 1 Turn the volume knob to select a device to delete, then press the knob.
2 Turn the volume knob to select [YES] or [NO], then press the knob.
PRIORITY Selects a device to be connected as priority device. " " appears in front of
the device name set as priority.
• "NO PAIR" appears if there is no registered device found.
P.BOOK Copies up to 400 numbers from the phonebook memory of a connected
2
WAIT * phone.
SET PINCODE Changes the PIN code (up to 6 digits).
(0000) 1 Turn the volume knob to select a number.
2 Press S / T to move the entry position.
Repeat steps
3 Press the volume knob to confirm.
AUTO CNNCT ON: The unit automatically reconnect when the Bluetooth device is within
range. ; OFF: Cancels.
INITIALIZE YES: Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.). ; NO: Cancels.
INFORMATION MY BT NAME: Displays the unit name (JVC UNIT). ; MY ADDRESS: Shows
address of this unit.
* 1
JVC Smart Music Control is designed to view JVC car receiver status
and perform simple control operations on Android smart phones. For
JVC Smart Music Control operations, visit JVC website:
<http://www.jvc.net/cs/car/>.
*
2 Selectable only when the connected phone supports OPP.
JS_JVC_KW_R910BT_J_03_EN.indd 15
1 2
and until you finish entering the PIN code.
Internet radio via Bluetooth
Default: XX
Listen to Pandora
Preparation:
Select [ON] for [PANDORA] in [SRC SELECT]. ( 4)
1
You can listen to Pandora on your smart phone (Android OS) through
Bluetooth on this unit.
1
Open the Pandora application on your device.
2 Connect to Bluetooth audio player. ( 11)
Press B /SOURCE to select PANDORA.
3
The source switches and broadcast starts automatically.
• You can operate Pandora in the same way as Pandora for iPod/iPhone.
( 9)
Listen to iHeartRadio
Preparation:
Select [ON] for [IHEART] in [SRC SELECT]. ( 4)
You can listen to iHeartRadio on your smart phone (Android OS) through
Bluetooth on this unit.
1
Open the iHeart Link application on your smart phone.
2 Connect your smart phone via Bluetooth connection. ( 11)
Press B /SOURCE to select IHEARTRADIO.
3
The source switches and broadcast starts automatically.
• You can operate iHeartRadio in the same way as iHeartRadio for iPod/
iPhone. ( 10)
BLUETOOTH®
ENGLISH | 15
23/12/2013 4:21:41 PM