General - Sony STR-DA5400ES Service Manual

STR-DA5400ES
Front panel
To remove the cover
Press PUSH.
When you remove the cover, keep it out
of reach from children.
Status of the POWER button
Off
The receiver is turned off (initial
setting).
Press POWER to turn the receiver on.
You cannot turn the receiver on using
the remote.
Name Function
POWER
Press to turn the
receiver on or off.
AUTO CAL MIC Connects to the
jack supplied optimizer
microphone for the
Digital Cinema Auto
Calibration function.
TONE MODE Adjusts FRONT/
CENTER/
TONE
SURROUND/
SURROUND BACK
BASS and TREBLE.
Press TONE MODE
repeatedly to select
BASS or TREBLE,
then turn TONE to
adjust the level.
MEMORY/
Press to operate a tuner
ENTER (FM/AM) and satellite
radio (XM/SIRIUS)
TUNING MODE
(U.S.A./Canadian
TUNING
model only).
10
SECTION 2

GENERAL

On/Standby
Press / on the remote to turn the
receiver on or set it to the standby mode.
When you press POWER on the
receiver, the receiver will be turned off.
Name Function
Remote sensor Receives signals from
remote commander.
DIMMER Press repeatedly to
adjust brightness of the
display.
DISPLAY Press repeatedly to
select information
displayed on the
display.
INPUT MODE Press to select the input
mode when the same
components are
connected to both
digital and analog jacks.
Display The current status of
window
the selected component
or a list of selectable
items appears here.
2CH/A.DIRECT Press to select sound
field.
A.F.D.
MOVIE
MUSIC
This section is extracted
from instruction manual.
Name Function
ZONE/ Press SELECT
POWER,
repeatedly to select
SELECT zone 2, zone 3 or main
zone. Each time you
press POWER, the
output signals for the
selected zone will be
turned on or off.
HDMI IN
Press to select the input
signal from the
component connected
to the HDMI IN jacks.
HDMI OUT Press to select output
signal to the component
connected to the HDMI
OUT jacks.
PHONES jack Connects to
headphones.
SPEAKERS Switch to OFF, A, B,
(OFF/A/B/A+B)
A+B of the front
speakers.
VIDEO 2 IN/ Connect to a portable
PORTABLE AV audio/video component
IN jacks such as a camcorder or
video game.
MULTI Lights up when multi-
CHANNEL
channel audio signals
DECODING are decoded.
lamp
INPUT Turn to select the input
SELECTOR source to play back.
To select the input
source for zone 2 or
zone 3, press ZONE/
SELECT ( ) to select
zone 2 or zone 3 first
("ZONE 2 INPUT" or
"ZONE 3 INPUT"
appears on the display),
then turn INPUT
SELECTOR to select
the input source.
MASTER
Turn to adjust the
VOLUME volume level of all
speakers at the same
time.