Motorola BR700 User Manual page 35

SECTION 3
3-4
The following table provides descriptions for the fields in the Basic
window:
Field or Button Description
Active
WAN Interface
Inactive
Disabled The WAN interface has been
Connection The router supports four connection modes:
Mode
!
!
!
!
Select the appropriate connection method for
your ISP (Internet Service Provider).
Based on which connection mode you select,
different areas are grayed out (become
inaccessible), leaving you only the appropriate
fields to fill in.
For details on each Connection Mode, refer to
Section 2:Installation.
Connection Click to perform a connection repair operation.
Repair
The type of repair depends on the connection
mode selected.
For example, for DHCP, the router issues a
request for a new IP address from the ISP's
DHCP server.
Connection Provides current information about the
Status connection status of the router.
Click Refresh to update the status.
SECTION 3, CONFIGURATION
Your WAN link is active.
Your WAN link is not active.
disabled. This can be altered on
the INTERNET > ADVANCED tab.
Cable Modem (DHCP)
DSL Modem (PPPoE)
Static Assigned
PPTP
CONFIGURATION