Operating Instructions - RCA RACE1202-B Owner's Manual

Operating Instructions

Operating Instructions
NOTE
The following instructions represent the Touch Pad, the same instructions can be used for the
Remote Control.
TO TURN UNIT ON:
TO OPERATE COOL MODE:
6
Low speed indicator lamp
lights
DO THIS:
PRESS POWER
BUTTON
Low speed indicator lamp
lights
DO THIS:
PRESS
MODE BUTTON
CHOOSE
COOL
YOU WILL SEE:
Note: When unit is turned on
it defaults energy saver
mode and the temperature
is79F(26℃). But if the unit
has been set fan mode before,
it defaults fan mode when
turned on again.In energy
saver mode, fan motor runs
when the compressor runs,
fan motor stops when the
compressor stops. When the
room temperature is above
the set temperature, the
compressor turns back on.
Energy saver mode can also
be initiated by pressing the
button on the remote control.
YOU WILL SEE:
Note: In this mode the initial
set temperature is 79F(26℃).
Energy saver
indicator lamp
lights
Cool mode indicator lamp lights