Binks 59-10001 A Operation Instructions Manual
  1. Manuals
  2. Brands
  3. Binks Manuals
  4. Paint Sprayer
  5. 59-10001 A
  6. Operation instructions manual

Binks 59-10001 A Operation Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL
EN
BINKS WREN
AIR BRUSHES
®
MODELS 59-10001 "A"**, 59-10002 "B", AND 59-10021 "C"**

OPERATING INSTRUCTIONS

**Models "A" and "C" are discontinued.
(Shown for component replacement only.)
IMPORTANT! DO NOT DESTROY
It is the customer's responsibility to have all operators and service personnel
read and understand this manual.
Contact your local Binks representative for additional copies of this manual.
READ ALL INSTRUCTIONS BEFORE OPERATING THIS BINKS PRODUCT.
77-1541-R21.3 (11/2015)
1 / 8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 59-10001 A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Binks 59-10001 A

Summary of Contents for Binks 59-10001 A

  • Page 1: Operating Instructions

    IMPORTANT! DO NOT DESTROY It is the customer's responsibility to have all operators and service personnel read and understand this manual. Contact your local Binks representative for additional copies of this manual. READ ALL INSTRUCTIONS BEFORE OPERATING THIS BINKS PRODUCT. 77-1541-R21.3 (11/2015)
  • Page 2 THIS INFORMATION TO THE OPERATOR OF THE EQUIPMENT. Inspect the equipment for worn or broken parts on a daily basis. Do not operate the equipment FOR FURTHER SAFETY INFORMATION REGARDING BINKS if you are uncertain about its condition. AND DEVILBISS EQUIPMENT, SEE THE GENERAL EQUIPMENT SAFETY BOOKLET (77-5300).
  • Page 3 Proficient use of the air brush is gained only after about 30 psi when in operation. Be sure that all you thoroughly know the major parts of the air hose connections are tight to prevent leakage. brush and how they operate. USE OF THE AIR BRUSH THE MECHANICAL CONTROLS The colors to be sprayed, or air brushed, should be...
  • Page 4 OPERATION NOTE THINNING FLUIDS When reassembling, dip washer and gasket Fluids that may be sprayed with the air brush range in vaseline or clear lubricant, and place on from light, or water-type consistency to heavy, or top of housing and insert preassembled. enamel-type consistency.
  • Page 5 BINKS WREN AIR BRUSHES ® MODELS 59-10001 “A” , 59-10002 “B”, AND 59-10021 “C” MODELS “A” AND “C” ARE DISCONTINUED – SHOWN FOR COMPONENT REPLACEMENT ONLY. ITEM PART DESCRIPTION QTY. HANDLE (5-137)  BODY (WREN “B”) (59-2)  59-3 TRIGGER BUTTON AIR VALVE SCREW (59-4) ...
  • Page 6 ACCESSORIES HOSES SIPHON BOTTLE ASSEMBLIES 59-60 Vinyl Hose Assembly 6' 59-61 Braided Hose Assembly 6' 59-81 59-31 59-30 2 oz. 1/2 oz. 1/4 oz. 59-10006 WREN “B” SET Includes air brush, 1/4, 1/2 and 2 fluid oz. color bottle assemblies and 59-60 (6') light- weight vinyl hose with connections, packed in an attractive, clear plastic case.

  • Page 7: Troubleshooting

    TROUBLESHOOTING BINKS WREN AIR BRUSHES – MODELS 59-10001 “A”, 59-10002 “B”, AND 59-10021 “C” ® COMPLAINT CAUSE REMEDY AIR BRUSH DOES Insufficient air supply. Increase air supply–requires 28 psi to operate “A” brush, NOT SPRAY and 30 psi to operate “B” and “C” brushes.
  • Page 8 WARRANTY POLICY Binks products are covered by Finishing Brands one year materials and workmanship limited warranty. The use of any parts or accessories, from a source other than Finishing Brands, will void all warranties. For specific warranty information please contact the closest Finishing Brands location listed below.

This manual is also suitable for:

59-10002 b59-10021 c

Table of Contents