Rear Speaker - Pioneer DEH-5250SD Installation Manual

1. This product
2. Rear output
3. Front output
7. Antenna
4. Subwoofer output
jack
6. Fuse (10 A)
5. Wired remote input
Hard-wired remote control adaptor
can be connected (sold separately).
8. Yellow
Connect to the constant 12 V supply terminal.
9. Red
Connect to terminal controlled by ignition
switch (12 V DC).
10. Orange/white
Connect to lighting switch terminal.
11. Black (chassis ground)
Connect to a clean, paint-free metal location.
12. White 14. Gray
 
16. Front speaker 16. Front speaker
 
13. White/black 15. Gray/black
17. Left 18. Right
19. Green 21. Violet
 

23. Rear speaker

23. Rear speaker
 
20. Green/black 22. Violet/black
24. With a 2 speaker system, do not connect
anything to the speaker leads that are
not connected to speakers.
29. Power amp
(sold separately)
25. To rear output
29. Power amp
(sold separately)
26. To front output
29. Power amp
(sold separately)
27. To subwoofer output
28. Connect with RCA cables
(sold separately)
31. System remote control
30. Blue/white
Connect to system control terminal of the
power amp or auto-antenna relay control
terminal (max. 300 mA 12 V DC).
32. Perform these connections
when using the optional
amplifier.
 
33. Subwoofer 33. Subwoofer
 
 
16. Front speaker 16. Front speaker
 
 
23. Rear speaker 23. Rear speaker
 
1. This product
7. Antenna
jack
6. Fuse (10 A)
8. Yellow
Connect to the constant 12 V supply terminal.
9. Red
Connect to terminal controlled by ignition
switch (12 V DC).
10. Orange/white
Connect to lighting switch terminal.
11. Black (chassis ground)
Connect to a clean, paint-free metal location.
34. Note
Change the initial setting of this unit.
The subwoofer output of this unit is monaural.
Fig. 1
圖1
2. Rear output
3. Front output
4. Subwoofer output
5. Wired remote input
Hard-wired remote control adaptor
can be connected (sold separately).
12. White

16. Front speaker

13. White/black
17. Left
19. Green

35. Subwoofer (4 Ω)

20. Green/black
36. When using a subwoofer of 70 W (2 Ω), be sure to connect
with Violet and Violet/black leads of this unit.
Do not connect anything with Green and Green/black leads.
19. Green 21. Violet
37. Not used.
20. Green/black 22. Violet/black
30. Blue/white
Connect to system control
terminal of the power amp or
auto-antenna relay control
terminal (max. 300 mA 12 V DC).
14. Gray

16. Front speaker

15. Gray/black
18. Right
21. Violet

35. Subwoofer (4 Ω)

22. Violet/black

38. Subwoofer
(4 Ω)  2

Fig. 2
圖2