Toyota 2002 Sequoia Owner's Manual page 307

—Headlights
1. Open the hood. Unplug the connec-
tor. Remove the rubber cover.
If the connector is tight, wiggle it.
02_SEQUOIA_U (L/O 0108)
2. Release the bulb retaining spring
and remove the bulb. Install a new
bulb and the bulb retaining spring.
To install a bulb, align the tabs of the
bulb with the cutouts of the mounting
hole.
2002 MY SEQUOIA_U (OM34418U)
"TOP PULL" mark
3. Install the rubber cover with the
"TOP PULL" mark upward,
snuggle on the boss. Then, plug in
the connector.
Make sure the rubber cover fits snugly on
the connector and the headlight body.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
and
301