If You Cannot Shift Automatic Transmission Selector Lever - Toyota 2003 Matrix Owner's Manual

Hide thumbs Also See for 2003 Matrix:
Table of Contents

Advertisement

NOTICE
Use only a cable or chain specifically
intended for use in towing vehicles.
Securely fasten the cable or chain to
the towing eyelet provided.
Before towing, release the parking brake
and put the transmission in neutral (manu-
al) or "N" (automatic). The key must be
in "ACC" (engine off) or "ON" (engine run-
ning).
CAUTION
If the engine is not running, the pow-
er assist for the brakes and steering
will not work so steering and braking
will be much harder than usual.
216
'03 MATRIX_U (L/O 0201)
If you cannot shift automatic
transmission selector lever
If you cannot shift the selector lever
out of "P" position to other positions
even though the brake pedal is de-
pressed, use the shift lock override but-
ton as follows:
1. Turn the ignition key to "LOCK"
position.
Make
sure
the
brake is applied.
2. Pry up the cover with a flat−bladed
screwdriver or equivalent.
2003 MY COROLLA MATRIX_U (OM12767U)
3. Insert your finger into the hole to
push down the shift lock override
button. You can shift out of "P"
position only while pushing the but-
ton.
4. Shift into "N" position.
parking
5. Insert the cover.
6. Start the engine. For your safety,
keep the brake pedal depressed.
Be sure to have the system checked by
your Toyota dealer as soon as possible.

Advertisement

Table of Contents
loading

Table of Contents