Toyota 2003 Matrix Owner's Manual page 125

Scanning a PTY station
If the radio in on the PTY mode, it will
tune in the next station within the same
program type.
For details, see "SCAN".
PWR/VOL (Power/Volume)
Push "PWR/VOL" to turn the audio system
on and off. Turn "PWR/VOL" to adjust the
volume.
RCL (Recall)
This button is designed to change the dis-
play in each mode.
You can also display the clock by pushing
this button when the ignition switch is off.
Radio
Push the "RCL" button to change the dis-
play among the frequency, program ser-
vice name and program type name when
RDS station is being received.
To change what is normally shown on the
display, push this button repeatedly until
you see the display you want, then hold
this button until the display flashes and
you hear a beep.
'03 MATRIX_U (L/O 0201)
Compact disc player
Push the "RCL" button to change the dis-
play between the track number
elapsed time.
To change what is normally shown on the
display, push this button repeatedly until
you see the display you want, then hold
this button until the display flashes and
you hear a beep.
RDM (Random)
Push the "RDM" button to listen the tracks
on the disc in random order. "RDM" will
appear on the display. To turn off the
random feature, push this button again.
SCAN
Radio
You can either scan all the frequencies on
a band or scan only the preset stations
for that band.
To scan the preset stations:
Push and hold the "SEEK/SCAN" button
from more than 4 seconds. "P SCAN" will
appear on the display and you hear two
beeps. The radio will tune in the next
preset station up the band, stay there for
5 seconds, and then move to the next
preset station. To cancel scan and remain
on current station, push this button again.
2003 MY COROLLA MATRIX_U (OM12767U)
To scan all the frequencies:
Push and hold either side of the "SEEK/
SCAN" button for two seconds. "SCAN"
and
will appear on the display and you hear
a beep. The radio will find the next station
up the station band, stay there for 5 se-
conds, and then scan again. To cancel
scan and remain on current station, push
this button again.
The radio will scan in forward only.
You can also scan only to stations with
the types of programs you want to listen
to or traffic announcements. (See "PROG
TYPE".)
Compact disc player
Push and hold either side of the "SEEK/
SCAN" button for more than two seconds.
"SCAN" will appear on the display and
you hear a beep. The disc will go to the
the next track and play for 10 seconds,
then go on the next track. To select a
track, push this button again.
The compact disc will scan in forward
only.
121