Installation And Configuration Overview - Motorola SB5100 Series User Manual

Introduction Before You Begin
To connect a single PC running Microsoft Windows
to a SURFboard cable modem, we recommend
using the Installation Assistant application.
You can start the Installation Assistant from the
Main Menu on the SURFboard Cable Modem
CD-ROM. In most cases, the Installation Assistant
automatically configures your cable modem.
SB5100 Series Cable Modem User Guide
Installation & Configuration

Installation and Configuration Overview

To install and configure your cable modem for a single PC running Microsoft Windows,
you can use the Installation Assistant.
Otherwise, to install and configure your cable modem:
1
Install the cables as described in one of:
•
"Cabling and Startup for a Single User"
•
"Cabling for Multiple Users"
2
If you are using the
Ethernet users can skip this step.
3
Configure TCP/IP
•
"Configuring TCP/IP"
•
Your Macintosh or UNIX user manual
Troubleshooting
on page 9
on page 40
USB port only, go to "Setting Up a USB Driver"
and verify the IP address for your computer following one of:
on page 22
FAQ Glossary License
on page 11.
8