Mazda 2013 Mazda3 Owner's Manual page 315

Interior Comfort
Audio System
NOTE
Do not perform the following operation while
"Updating Channels XXX %",
"Updating Receiver" is displayed. Otherwise,
the updating procedure will be canceled.
Turning off the audio power
l
Switching to other modes
l
Switching the ignition off
l
When the SIRIUS mode is switched to
another mode, or when the power is
turned off, the present channel which is
being received is stored as the last
channel.
Channel up
Turn the manual tuning dial to the right or
press the seek up button (
Channel down
Turn the manual tuning dial to the left or
press the seek down button (
NOTE
The channel is continuously switched to the
next or previous channel while the seek tuning
button ( , ) is continuously pressed.
Unsubscribed channel
When a channel which has been preset
becomes unsubscribed or the current
channel being listened to becomes
unsubscribed, the following is displayed:
"Call 888-539-SIRIUS"
"to subscribe"
NOTE
When the subscription contract is canceled, all
of the channels including channel 184 appear
as unsubscribed.
Preset channel programming
1. Select the desired channel to be
programmed.
6-74
).
).
2. Long-press any of the preset on-screen
buttons.
NOTE
Six stations can be stored in each bank,
SIRIUS1, SIRIUS2 and SIRIUS3 for
convenient access to your favorite stations.
Preset channel call-up
Touch the preset on-screen button for the
channel which you want to select.
NOTE
In the initial setting, all channels are preset to
184.
Selection from channel list
Receivable channels can be displayed on
the channel list screen. You can easily
select the channel you want to listen from
the list. Each category can be also
displayed.
1. Touch the
2. Touch the channel you want to listen
from the list.
NOTE
Currently available channels (including
parental locked channels) are all displayed in
the list.
(Select from category list)
1. Touch the
button on the channel list screen.
2. Touch the category name which you
want to select from the list.
NOTE
A category can be set only when a channel
which belongs to a category is being received.
on-screen button.
on-screen