Mazda 2013 Mazda3 Owner's Manual page 222

qHeadlight High-Beam Indicator
Light
This light indicates one of two things:
The high-beam headlights are on.
l
The turn signal lever is in the flash-to-
l
pass position.
qShift Position Indicator Light
(Automatic Transaxle)
This indicates the selected shift position.
Gear position indicator
In manual mode, the "M" of the shift
position indicator illuminates and the
numeral for the selected gear displays in
the gear position indicator.
Warning/Indicator Lights and Beep Sounds
qLow Engine Coolant Temperature
Indicator Light (Blue)
When the ignition is switched ON, the
light illuminates momentarily and then
turns off.
The light illuminates continuously when
the engine coolant temperature is low and
turns off after the engine is warm.
NOTE
If the low engine coolant temperature indicator
light remains illuminated after the engine has
been sufficiently warmed up, the temperature
sensor could have a malfunction. Consult an
Authorized Mazda Dealer.
qTCS/DSC Indicator Light
This indicator light stays on for a few
seconds when the ignition is switched
ON. If the TCS or DSC is operating, the
indicator light flashes.
If the light stays on, the TCS or DSC may
have a malfunction and they may not
operate correctly. Take your vehicle to an
Authorized Mazda Dealer.
Driving Your Mazda
í
í
5-59
Some models.