Before You Begin - Motorola SURFboard SB4200 User Manual

Introduction

Before You Begin

10/100Base-T
shielded
Ethernet cable
SB4200
User Guide
CD-ROM
Home Print
Installation
Before You Begin
Before you begin the installation, check that you have:
Power cord
Item
Power cord
One 10/100Base-T
shielded Ethernet cable
One USB cable
USB cable
SB4200 User Guide
CD-ROM
You need to purchase a 75-ohm coaxial cable with F-type connectors for connecting
your SB4200 to the nearest cable outlet. If you have a TV attached to the cable outlet,
you may need a 5-900 MHz splitter to use both the TV and the SB4200. Both the coaxial
cable and the RF splitter are readily available at consumer electronic stores.
X
Exit
Configuration
Description
Required for connecting the SB4200 to the AC
electrical outlet.
Required for connecting to the Ethernet port.
Required for connecting to the USB port.
Contains the User Guide and USB drivers necessary
for connecting to USB port.
5
Troubleshooting Legal