Motorola SURFboard SB4200 User Manual page 55

Introduction Before You Begin
Home Print
Installation
Recovery After Installation Errors with
Win98_SE and Windows 98
Example 2
The SB4200 drivers may have loaded, but no protocol was bound to the adapter. To see
if this is the case:
1
Remove the USB cable from the SB4200.
2
From the Windows Desktop, right-click the Network Neighborhood icon
a list of options.
3
Highlight and then click Properties at the bottom of the list. The Network window is
displayed.
4
Click the Configuration tab, highlight the Motorola Surfboard USB Cable Modem
SB4100 entry, and then click Properties.
5
Click the Bindings tab. If TCP/IP is not listed, either add the protocol to the adapter
or remove the entry for Motorola Surfboard USB Cable Modem SB4100.
To remove the entry: In the Network window, highlight Motorola Surfboard USB Cable
Modem SB4100 and then press Remove.
X
Exit
Configuration
50
Troubleshooting
to
Legal
display